Dear sir,
Thank you pylon for responding. Yes i changed the baudrate Uart (arduino side console-250000) to same
as Linux baudrate(which is used in Yun Terminal sktech-250000) but am getting same junk data
kernel log showing below line after it junk came:-
[ 0.700000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) ió$»
uboot:-
ar7240> printenv
bootcmd=bootm 0x9f050000
bootdelay=1
baudrate=115200
ethaddr=0x00:0xaa:0xbb:0xcc:0xdd:0xee
ipaddr=192.168.2.100
serverip=192.168.2.254
ethact=eth0
production=no
bootargs=console=ttyS0,115200 root=/dev/mtdblock3 rootfstype=squashfs init=/linuxrcmtdparts=ar7240-nor0:256k(uboot),256k(env),1024k(kernel),14720k(rootfs),64k(nvram),64k(art)
stdin=serial
stdout=serial
stderr=serial
Environment size: 377/65532 bytes
But in Yun Terminal sktech linux baud rate showing 250000.
If you dont mine please explain me some what clearly.
Thank you in advance.
Regards
amarr.M