ArduinoBLE for Nicla Sense ME

[in0]

Hi @ckuehnel

@ckuehnel

WARNING: library ArduinoBLE claims to run on samd, megaavr, mbed architecture(s) and may be incompatible with your current board which runs on mbed_nicla architecture(s).

You can ignore this. The warning is only because the library's metadata didn't specify compatibility with the architecture of the Nicla, but it is the right library. This metadata deficiency has already been resolved, but there just hasn't been a release since that time. So it will no longer be displayed after the next release comes out.

@ckuehnel

D:\ArduinoSketches\libraries\ArduinoBLE\src\utility\HCICordioTransport.cpp:45:13: error: 'vendor' in namespace 'ble' does not name a type

extern ble::vendor::cordio::CordioHCIDriver& ble_cordio_get_hci_driver();
         ^~~~~~

From this error, I can see you are using a very outdated version of the ArduinoBLE library.

It looks like maybe you tried to update it but the update failed leaving the library in this temporary "arduino_933146" folder:

@ckuehnel

Multiple libraries were found for "ArduinoBLE.h"

Used: D:\ArduinoSketches\libraries\ArduinoBLE

Not used: D:\ArduinoSketches\libraries\arduino_933146

Please try this:

1. Delete this folder from your computer:

   D:\ArduinoSketches\libraries\ArduinoBLE
   

   Please be very careful when deleting files from your computer. When in doubt, back up!
2. Delete this folder from your computer:

   D:\ArduinoSketches\libraries\arduino_933146
   

3. Select Sketch > Include Library > Manage Libraries... from the Arduino IDE menus.
4. Wait for the update to finish.
5. In the "Filter your search" field, type arduinoble.
6. Press Enter.
7. Scroll down through the list of libraries until you see "ArduinoBLE by Arduino". Click on it.
8. Click the Install button.
9. Wait for the installation to finish.
10. Click the Close button.

Now try compiling your sketch again. You will still get that architecture warning, but hopefully the errors will be fixed.