AT cmd - CIPSEND, no response after SEND OK

Projects Networking, Protocols, and Devices
12

Knipsel

SoftwareSerial espSerial(RX_PIN, TX_PIN); // RX, TX'

void setup() {
  Serial.begin(9600);
  espSerial.begin(9600);
  espSerial.write("ATE0\r\n");
  espSerial.write("AT+CIPMUX=1\r\n"); 
}

void loop() {
    espSerial.write("AT\r\n");
    delay(1000);
    espSerial.write("AT+CIPSTART=4,\"TCP\",\"145.92.228.31\",80\r\n");  
    delay(1000);
    espSerial.write("AT+CIPSEND=4,59\r\n");
    delay(100);  
    espSerial.write("GET /crypto/ADA HTTP/1.1\r\nHost: api.iot.hva-robots.nl\r\n\r\n");
    delay(100);
    espSerial.write("AT+CIPCLOSE=4\r\n");  
    delay(500);
  
}

Some how i get this no ip response. So i cant test the next line