# ATMEGA1284P Bootloading Problems - device signature error

**URL:** <https://forum.arduino.cc/t/atmega1284p-bootloading-problems-device-signature-error/1103848>\
**Category:** Uploading\
**Created:** [March 19, 2023, 7:40am UTC](https://forum.arduino.cc/t/atmega1284p-bootloading-problems-device-signature-error/1103848 "2023-03-19T07:40:56Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![markd833](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/markd833/32/1186928_2.png) [@markd833](https://forum.arduino.cc/u/markd833)\
**Post date:** [March 19, 2023, 2:20pm UTC](https://forum.arduino.cc/t/atmega1284p-bootloading-problems-device-signature-error/1103848/6 "2023-03-19T14:20:14Z")

</div>

> [@kamapaul96](#):
>
> What you're seeing there was me attempting to edit the config file to have the signature match what the compiler is reading from the device.

I would change that back to the original values.

Do you have the capacitor on the reset line?

This discussion might help:

> [@burn bootloader to mega 2560 with and UNO ISP (SOLVED)](https://forum.arduino.cc/t/burn-bootloader-to-mega-2560-with-and-uno-isp-solved/111267):
>
> Hi, im going to install a bootloader to an arduino mega 2560 with arduino UNO as ISP. I follow this steps: [http://arduino.cc/en/Tutorial/ArduinoISP](http://arduino.cc/en/Tutorial/ArduinoISP) and doesnt work for me but i see in the sketch this lines: // pin name: not-mega: mega(1280 and 2560) // slave reset: 10: 53 // MOSI: 11: 51 // MISO: 12: 50 // SCK: 13: 52 and now i want to know, which of the next images is right wired? 1- 2- Thanks

---

_[View the full topic](https://forum.arduino.cc/t/atmega1284p-bootloading-problems-device-signature-error/1103848)._
