Recently bought a blank ATmega644 I want to use a ATmega328 to burn the bootloader on it so i can use it with ardunio IDE 1.0+ .After looking at
http://www.gammon.com.au/forum/?id=11635 on how to do this i cant find a pathetic guide on how to do this for a ATmega644.Any ideas ?
Thx
flak88:
Recently bought a blank ATmega644 I want to use a ATmega328 to burn the bootloader on it so i can use it with ardunio IDE 1.0+ .After looking at
Gammon Forum : Electronics : Microprocessors : Atmega bootloader programmer on how to do this i cant find a pathetic guide on how to do this for a ATmega644.Any ideas ?Thx
It's actually on the same website..Gammon Forum : Electronics : Microprocessors : How to make an Arduino-compatible minimal board
Just follow the guide for the ATMega1284p, about 70% down on the page. The pinout for MISO, MOSI, SCK and RST are the same for the 644.
You will need an ATmega644p bootloader. The Sanguino is a 644p Arduino clone so they probably have one you can use: http://sanguino.cc/