ATtiny85 Signature Failure

Hello guys!

I recently bought an ATtiny85 for a small project that i want to build but i have stuck.I cant burn the bootloader. My connections are good,i have tried different ways (internal-external crystal) but nothing.
i always take this:

avrdude: Expected signature for ATtiny85 is 1E 93 08
Double check chip, or use -F to override this check.
Error while burning bootloader.

I already checked out other forums but i have found nothind about this message. (The most common result i get is the problem 0x00000).

I am new with Attiny so please help me.

My connections are:

Arduino ATtiny
D10 PIN 1
D11 PIN 5
D12 PIN 6
D13 PIN 7
5V PIN 8
GND PIN 4

Note: I have tried to connect a 100nF on the PIN8 and PIN4 but nothing.

Please do this:

  • File > Preferences > Show verbose output during: > compilation (uncheck) > upload (check) > OK
  • Tools > Burn Bootloader
  • After the process fails you’ll see a button on the right side of the orange bar “Copy error messages”. Click that button.
  • Paste the error messages in a reply here USING CODE TAGS (</> button on the toolbar).

I hope it helps.

(Thanks for the specification about “</>” brcause i probably wouldnt find it).

Arduino: 1.8.6 Hourly Build 2018/01/03 03:33 (Windows 7), Board: "ATtiny25/45/85, ATtiny85, External 16 MHz"

C:\Users\Dimitris Chalkias\Desktop\arduino-nightly\hardware\tools\avr/bin/avrdude -CC:\Users\Dimitris Chalkias\Desktop\arduino-nightly\hardware\tools\avr/etc/avrdude.conf -v -v -v -v -pattiny85 -cstk500v1 -PCOM6 -b19200 -e -Uefuse:w:0xff:m -Uhfuse:w:0xdf:m -Ulfuse:w:0xfe:m 

avrdude: Version 6.3, compiled on Jan 17 2017 at 12:00:53
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "C:\Users\Dimitris Chalkias\Desktop\arduino-nightly\hardware\tools\avr/etc/avrdude.conf"

         Using Port                    : COM6
         Using Programmer              : stk500v1
         Overriding Baud Rate          : 19200
avrdude: Send: 0 [30]   [20] 
avrdude: Send: 0 [30]   [20] 
avrdude: Send: 0 [30]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [10] 
         AVR Part                      : ATtiny85
         Chip Erase delay              : 400000 us
         PAGEL                         : P00
         BS2                           : P00
         RESET disposition             : possible i/o
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    12     4    0 no        512    4      0  4000  4500 0xff 0xff
                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           flash         65     6    32    0 yes      8192   64    128 30000 30000 0xff 0xff
                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00
                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00

         Programmer Type : STK500
         Description     : Atmel STK500 Version 1.x firmware
avrdude: Send: A [41] . [80]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [02] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [81]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [01] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [82]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [12] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [98]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
         Hardware Version: 2
         Firmware Version: 1.18
         Topcard         : Unknown
avrdude: Send: A [41] . [84]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [85]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [86]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [87]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [89]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [00] 
avrdude: Recv: . [10] 
         Vtarget         : 0.0 V
         Varef           : 0.0 V
         Oscillator      : Off
         SCK period      : 0.1 us

avrdude: Send: A [41] . [81]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [01] 
avrdude: Recv: . [10] 
avrdude: Send: A [41] . [82]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [12] 
avrdude: Recv: . [10] 
avrdude: Send: B [42] . [14] . [00] . [00] . [01] . [01] . [01] . [01] . [03] . [ff] . [ff] . [ff] . [ff] . [00] @ [40] . [02] . [00] . [00] . [00]   [20] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [10] 
avrdude: PAGEL and BS2 signals not defined in the configuration file for part ATtiny85, using dummy values
avrdude: Send: E [45] . [05] . [04] . [d7] . [a0] . [01]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [10] 
avrdude: Send: P [50]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [10] 
avrdude: AVR device initialized and ready to accept instructions

Reading | avrdude: Send: V [56] 0 [30] . [00] . [00] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [1e] 
avrdude: Recv: . [10] 
avrdude: Send: V [56] 0 [30] . [00] . [01] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [93] 
avrdude: Recv: . [10] 
################avrdude: Send: V [56] 0 [30] . [00] . [02] . [00]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [0b] 
avrdude: Recv: . [10] 
################################## | 100% 0.03s

avrdude: Device signature = 0x1e930b
avrdude: Expected signature for ATtiny85 is 1E 93 08
         Double check chip, or use -F to override this check.
avrdude: Send: Q [51]   [20] 
avrdude: Recv: . [14] 
avrdude: Recv: . [10] 

avrdude done.  Thank you.

Error while burning bootloader.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

Dear pert

From the steps you told me to follow you make me find the ATtiny signature. I corrected from the avr file and now burns bootloader perfectly.Thank you very much for your help and your time.

Be well!!!

I'm glad to hear it's working now. I'm quite curious; why did your avrdude.conf file have the signature property for ATtiny85 set to 0x1e 0x93 0x08? It looks like that's the signature for ATmega8535.

I honestly I don't know..I had the same problem (burn bootloder due signature) with an Atmega328p-pu.

I did the same thing then(found the correct signature) and replace it.

At least its working now. :)