A tu réussi a implémenter ton code ??
Moi j'ai le même soucis
Voici mon code fonctionne parfaitement mais pas de code ..Quelqun pourrais t il maider svp ?
// Load Wi-Fi library
#include <ESP8266WiFi.h>
// Replace with your network credentials
const char* ssid = "UPC1D148D6";
const char* password = "w6akjznbjYmh";
// Set web server port number to 80
WiFiServer server(80);
// Variable to store the HTTP request
String header;
// Auxiliar variables to store the current output state
String relay1State = "eteint";
String relay2State = "eteint";
String relay3State = "eteint";
String relay4State = "eteint";
// Assign output variables to GPIO pins
const int relay1 = 5; // GPIO5 D1
const int relay2 = 4; // GPIO4 D2
const int relay3 = 0; // GPIO0 D3
const int relay4 = 2; // GPIO2 D4
void setup() {
Serial.begin(115200);
// Initialize the output variables as outputs
pinMode(relay1, OUTPUT);
pinMode(relay2, OUTPUT);
pinMode(relay3, OUTPUT);
pinMode(relay4, OUTPUT);
// Set outputs to HIGH. relay active LOW
digitalWrite(relay1, LOW);
digitalWrite(relay2, LOW);
digitalWrite(relay3, LOW);
digitalWrite(relay4, LOW);
// Connect to Wi-Fi network with SSID and password
Serial.print("Connecting to ");
Serial.println(ssid);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
// Print local IP address and start web server
Serial.println("");
Serial.println("WiFi connected.");
Serial.println("IP address: ");
Serial.println(WiFi.localIP());
server.begin();
}
void loop() {
WiFiClient client = server.available(); // Listen for incoming clients
if (client) { // If a new client connects,
Serial.println("New Client."); // print a message out in the serial port
String currentLine = ""; // make a String to hold incoming data from the client
while (client.connected()) { // loop while the client's connected
if (client.available()) { // if there's bytes to read from the client,
char c = client.read(); // read a byte, then
Serial.write(c); // print it out the serial monitor
header += c;
if (c == '\n') { // if the byte is a newline character
// if the current line is blank, you got two newline characters in a row.
// that's the end of the client HTTP request, so send a response:
if (currentLine.length() == 0) {
// HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK)
// and a content-type so the client knows what's coming, then a blank line:
client.println("HTTP/1.1 200 OK");
client.println("Content-type:text/html");
client.println("Connection: close");
client.println();
// turns the GPIOs on and off
if (header.indexOf("GET /5/on") >= 0)
{
Serial.println("GPIO 5 on");
relay1State = "allumer";
digitalWrite(relay1, HIGH);
}
else if (header.indexOf("GET /5/off") >= 0)
{
Serial.println("GPIO 5 off");
relay1State = "eteinte";
digitalWrite(relay1, LOW);
}
else if (header.indexOf("GET /4/on") >= 0)
{
Serial.println("GPIO 4 on");
relay2State = "allumer";
digitalWrite(relay2, HIGH);
}
else if (header.indexOf("GET /4/off") >= 0)
{
Serial.println("GPIO 4 off");
relay2State = "eteinte";
digitalWrite(relay2, LOW);
}
else if (header.indexOf("GET /0/on") >= 0)
{
Serial.println("GPIO 0 on");
relay3State = "allumer";
digitalWrite(relay3, HIGH);
}
else if (header.indexOf("GET /0/off") >= 0)
{
Serial.println("GPIO 0 off");
relay3State = "eteinte";
digitalWrite(relay3, LOW);
}
else if (header.indexOf("GET /2/on") >= 0)
{
Serial.println("GPIO 2 on");
relay4State = "allumer";
digitalWrite(relay4, HIGH);
}
else if (header.indexOf("GET /2/off") >= 0)
{
Serial.println("GPIO 2 off");
relay4State = "eteinte";
digitalWrite(relay4, LOW);
}
// Display the HTML web page
client.println("<!DOCTYPE html><html>");
client.println("<head><meta name=\"viewport\" content=\"width=device-width, initial-scale=1\">");
client.println("<link rel=\"icon\" href=\"data:,\">");
// CSS to style the on/off buttons
// Feel free to change the background-color and font-size attributes to fit your preferences
client.println("<style>html { font-family: Helvetica; display: inline-block; margin: 0px auto; text-align: center;}");
client.println(".button { background-color: #195B6A; border: none; color: white; padding: 12px 24px;");
client.println("text-decoration: none; font-size: 20px; margin: 2px; cursor: pointer;}");
client.println(".button2 {background-color: #77878A;}</style></head>");
// Web Page Heading
client.println("<body><h1>Systeme domotique wifi</h1>");
// Display current state, and ON/OFF buttons for GPIO 5
client.println("<p>Petite lampe - Actuellement " + relay1State + "</p>");
// If the relay1State is off, it displays the ON button
if (relay1State == "eteinte") {
client.println("<p><a href=\"/5/on\"><button class=\"button\">Allumer</button></a></p>");
} else {
client.println("<p><a href=\"/5/off\"><button class=\"button button2\">Eteindre</button></a></p>");
}
// Display current state, and ON/OFF buttons for GPIO 4
client.println("<p>Lampe de Sel - Actuellement " + relay2State + "</p>");
// If the relay2State is off, it displays the ON button
if (relay2State == "eteinte") {
client.println("<p><a href=\"/4/on\"><button class=\"button\">Allumer</button></a></p>");
} else {
client.println("<p><a href=\"/4/off\"><button class=\"button button2\">Eteindre</button></a></p>");
}
// Display current state, and ON/OFF buttons for GPIO 0
client.println("<p>Android BOX - Actuellement " + relay3State + "</p>");
// If the relay1State is off, it displays the ON button
if (relay3State == "eteinte") {
client.println("<p><a href=\"/0/on\"><button class=\"button\">Allumer</button></a></p>");
} else {
client.println("<p><a href=\"/0/off\"><button class=\"button button2\">Eteindre</button></a></p>");
}
// Display current state, and ON/OFF buttons for GPIO 2
client.println("<p>TV - Actuellement " + relay4State + "</p>");
// If the relay2State is off, it displays the ON button
if (relay4State == "eteinte") {
client.println("<p><a href=\"/2/on\"><button class=\"button\">Allumer</button></a></p>");
} else {
client.println("<p><a href=\"/2/off\"><button class=\"button button2\">Eteindre</button></a></p>");
}
client.println("</body></html>");
// The HTTP response ends with another blank line
client.println();
// Break out of the while loop
break;
} else { // if you got a newline, then clear currentLine
currentLine = "";
}
} else if (c != '\r') { // if you got anything else but a carriage return character,
currentLine += c; // add it to the end of the currentLine
}
}
}
// Clear the header variable
header = "";
// Close the connection
client.stop();
Serial.println("Client disconnected.");
Serial.println("");
}
}