Bare conductive touch board using proximity +sensor

Projects General Guidance
1

Hi,

I'm building projects with Bare conductive touch board using proximity +sensor, I have seen the basic tutorials but I would like to build more advance project such as interacting via poster to a laptop screen to build animation..etc. please if you have any links to send me regarding proximity tutorials.

regards,

I have attached a screen shot from "The Touch Board: Interactivity Everywhere"

Proximity.png
Proximity.png697×462 177 KB

2

Hi,
Please i need tutorials links to build proximity +sensor projects...

Regards,

Please check the attachment...

Proximity.png
Proximity.png697×462 177 KB

3

You may want to take a look at How To Set Up Proximity Sensing With The Touch Board – Bare Conductive for a basic setup

OR check out http://www.bareconductive.com/make/the-touch-board-maxmsp/ to replicate the screen shot that you've attached. The Max patch requires you to upload some code onto the board and then you can build visuals in Max.

You could take a look at our Grapher if you prefer processing: https://github.com/BareConductive/mpr121-grapher

Hope this helps.

4

Sorry about that. Last link didn't work: GitHub - BareConductive/mpr121-grapher: Bare Conductive MPR121 Grapher Processing Sketch

5

Thank you very much..