# Best kit for developer turning into maker

**URL:** <https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505>\
**Category:** General Guidance\
**Created:** [July 11, 2017, 3:15pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505 "2017-07-11T15:15:13Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![mercmobily](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/mercmobily/32/797503_2.png) [@mercmobily](https://forum.arduino.cc/u/mercmobily)\
**Post date:** [July 11, 2017, 3:15pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/1 "2017-07-11T15:15:13Z")

</div>

Hi,

I am a very seasoned software developer. I did electronics at school, some 25 years ago. I remember karnaugh maps, I remember some of the theory of electronics (amperes, resistors, volts, etc.) and remember the logic port theory etc.

I just discovered Arduino, and would love to get into it. I will frankly have no trouble using the IDE and making rather complex chunks of code (in 25 years, I also worked with state automatons, assembler, etc. and already know C++).

I am after a starter kit that will suit my needs; I aim at:

- Understanding how to make circuits and understand how and why _actually_ use resistors and other components
- Build "things" using a breadboard
- Some basic sensors etc.
- (Re)learning the basics of electronics with a practical approach

I read that some of the kits come with amazing manuals and projects. Having read (I hope) my background, which kit/book/whatever do you think would work for me?

Thank you!

Merc.

---

<div class="post-metadata">

**Author:** ![bDeters](https://avatars.discourse-cdn.com/v4/letter/b/f08c70/32.png) [@bDeters](https://forum.arduino.cc/u/bDeters)\
**Post date:** [July 11, 2017, 4:56pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/2 "2017-07-11T16:56:09Z")

</div>

There are certainly lots of kits out there. It might help narrow it down if you had any leaning toward what type of projects you are interested in (for example, robotics, sensing, wifi). I came across [this book](https://www.indiegogo.com/projects/abc-basic-connections-reference-book-for-makers-arduino#/) a while back that sounds like it might be perfect for you... but it wont ship until September (at best, it is crowdfunded after all).

---

<div class="post-metadata">

**Author:** ![anon57585045](https://avatars.discourse-cdn.com/v4/letter/a/ed8c4c/32.png) [@anon57585045](https://forum.arduino.cc/u/anon57585045)\
**Post date:** [July 11, 2017, 4:58pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/3 "2017-07-11T16:58:07Z")

</div>

Kit, Schmidt. Just order the stuff from China.

---

<div class="post-metadata">

**Author:** ![LarryD](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/larryd/32/215550_2.png) [@LarryD](https://forum.arduino.cc/u/LarryD)\
**Post date:** [July 11, 2017, 5:05pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/4 "2017-07-11T17:05:52Z")

</div>

Hi Merc

Lots out there, here is a good site:

> **[ARDUINO KITS](http://www.yourduino.com/sunshop/index.php?l=product_list&c=6)**
>
> ARDUINO KITS

A good starter book:

> **[Arduino Cookbook: Recipes to Begin, Expand, and Enhance Your Projects: Margolis,...](https://www.amazon.ca/Arduino-Cookbook-Recipes-Enhance-Projects/dp/1449313876)**
>
> Arduino Cookbook: Recipes to Begin, Expand, and Enhance Your Projects: Margolis, Michael: 9781449313876: Books - Amazon.ca

Interesting Arduino links.

Watch these:

[![](https://europe1.discourse-cdn.com/arduino/original/4X/f/6/4/f642d452495b887aec35e59af213e2ff10773805.jpeg "Arduino Programming Syntax") ](https://www.youtube.com/watch?v=CbJHL_P5RJ8)

[![](https://europe1.discourse-cdn.com/arduino/original/4X/6/9/0/690deae52352e868dcee44eab5aa8c692366fc58.jpeg "Arduino Arithmetic Operators") ](https://www.youtube.com/watch?v=UUx0_s-ElSs)

[![](https://europe1.discourse-cdn.com/arduino/original/4X/2/1/c/21cda2d65c6030a15debfb2458c6e57fa78af460.jpeg "Arduino Control Flow") ](https://www.youtube.com/watch?v=QpPGGuaGbCA)

[![](https://europe1.discourse-cdn.com/arduino/original/4X/8/4/b/84b9d0e2bb505007effa47a6e79fea1d4e537177.jpeg "Arduino Data Types, Literals, and Variables | Adventures in Science") ](https://www.youtube.com/watch?v=xmZXWMEltEc)

https://www.youtube.com/embed/videoseries?list=PLir_96O_k3klCo-7Dm-HFUmZCIwftAZIm&wmode=transparent&rel=0&autohide=1&showinfo=1&enablejsapi=1

Some things to read:

[https://learn.adafruit.com/category/learn-arduino](https://learn.adafruit.com/category/learn-arduino)

[https://learn.sparkfun.com/tutorials/how-to-read-a-schematic](https://learn.sparkfun.com/tutorials/how-to-read-a-schematic)

> **[Arduino - Home](https://www.arduino.cc/)**
>
> Open-source electronic prototyping platform enabling users to create interactive electronic objects.

> **[Learn | Arduino Documentation](https://docs.arduino.cc/learn/)**
>
> Basic knowledge about principles and techniques behind the Arduino ecosystem.

[http://playground.arduino.cc/Code/AvoidDelay](http://playground.arduino.cc/Code/AvoidDelay)

[https://forum.arduino.cc/index.php?topic=384198.0](https://forum.arduino.cc/index.php?topic=384198.0)

> **[Gammon Forum : Electronics : Microprocessors : Arduino programming traps,...](http://www.gammon.com.au/forum/?id=12153)**
>
> Gammon Forum : Electronics : Microprocessors : Arduino programming traps, tips and style guide

https://www.youtube.com/embed/videoseries?list=PLA567CE235D39FA84&wmode=transparent&rel=0&autohide=1&showinfo=1&enablejsapi=1

> **[Arduino Hardware](https://www.arduino.cc/en/hardware/)**
>
> Open-source electronic prototyping platform enabling users to create interactive electronic objects.

[https://learn.sparkfun.com/tutorials/using-the-logic-level-converter](https://learn.sparkfun.com/tutorials/using-the-logic-level-converter)

[http://arduino-info.wikispaces.com/](http://arduino-info.wikispaces.com/)

> **[Gammon Forum : Electronics : Microprocessors : Driving motors, lights, etc....](http://www.gammon.com.au/motors)**
>
> Gammon Forum : Electronics : Microprocessors : Driving motors, lights, etc. from an Arduino output pin

> **[Gammon Forum : Electronics : Microprocessors : Switches tutorial](http://www.gammon.com.au/forum/?id=11955)**
>
> Gammon Forum : Electronics : Microprocessors : Switches tutorial

Share some of you past here 😉  
[https://forum.arduino.cc/index.php?topic=445951.0](https://forum.arduino.cc/index.php?topic=445951.0)

.

---

<div class="post-metadata">

**Author:** ![MorganS](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/morgans/32/218718_2.png) [@MorganS](https://forum.arduino.cc/u/MorganS)\
**Post date:** [July 11, 2017, 5:06pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/5 "2017-07-11T17:06:33Z")

</div>

It is hard to know what to order if you are just starting.

I think the advice to follow your heart is correct. Maybe some flashy LEDs or a GPS? Those are very different projects that will need different parts.

Start with a cheap kit with just some basic stuff. Then add the more advanced sensors, motors and LEDs as you learn.

---

<div class="post-metadata">

**Author:** ![PaulRB](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/paulrb/32/216330_2.png) [@PaulRB](https://forum.arduino.cc/u/PaulRB)\
**Post date:** [July 11, 2017, 9:18pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/6 "2017-07-11T21:18:42Z")

</div>

> mercmobily:
> 
> - Build "things" using a breadboard

In that case buy an Arduino that can plug into a breadboard. That means a Nano, Mini, Micro or similar, rather than an Uno, Mega or Due. Other forum members must be tired of hearing me say this. But using an Uno with a breadboard just leads to a fragile and unreliable mess of jumper wires. Uno/Mega etc are designed for use with shields rather than breadboards.

Don't buy the kits, they are full of rubbish. Don't buy "lucky bags", they are full of the unlucky components no one else wanted, and you won't either. Don't buy "Dupont" jumper wires, they are unreliable in my experience.

Buy a couple of metres each of 22awg solid core wire in a few colours including red and black. Buy wire cutters, strippers and small nosed pliers and lay your wiring flat on the breadboard.

This is how I like to use breadboards:

 ![IMG_20170131_230002.jpg](https://europe1.discourse-cdn.com/arduino/original/4X/1/5/0/15083fe69db50690972209d3b3b31e4133d5c080.jpeg)  
Yes, it takes longer to build the circuit. But then it does not fall apart if you happen to sneeze, and you can follow all the connections easily to track down the mistakes you make. When you are done, pull out all the lengths of wire and keep them in a jar or something for re-use in your next prototype, which will be quicker because you will have many or most of the bits of wire needed already cut & stripped to the lengths you need.

---

<div class="post-metadata">

**Author:** ![anon57585045](https://avatars.discourse-cdn.com/v4/letter/a/ed8c4c/32.png) [@anon57585045](https://forum.arduino.cc/u/anon57585045)\
**Post date:** [July 11, 2017, 10:04pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/7 "2017-07-11T22:04:19Z")

</div>

> PaulRB:  
> Don't buy "Dupont" jumper wires, they are unreliable in my experience.

Only the male ones. The female Dupont jumpers work excellently on the header pins that are on almost everything. For proto boards, I also use phone wire.

---

<div class="post-metadata">

**Author:** ![GoForSmoke](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/goforsmoke/32/1127097_2.png) [@GoForSmoke](https://forum.arduino.cc/u/GoForSmoke)\
**Post date:** [July 11, 2017, 10:05pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/8 "2017-07-11T22:05:01Z")

</div>

With a starter kit you can explore different uses of Arduino for a good while without having to round up all the bits yourself but it's going to cost more.

If the kit doesn't have a multimeter and you don't have one, get one! It's your hardware watch-window. You can avoid a lot of mistakes by using the meter.

When you're done with the kit, Harbor Freight sells things like these for $4 each, great for resistors, caps, leds.

> **[24 Compartment Large Storage Container](https://www.harborfreight.com/24-divider-storage-container-94458.html)**
>
> Amazing deals on this 24 Compartment Large Storage Container at Harbor Freight. Quality tools & low prices.

They used to sell a magnifier visor with set of 4 lenses but now only have the lesser one but check it out.  
Maybe a pair of reading glasses or two will come in handy for close work.

They also sell the Helping Hands, I see a new (to me) one, the Jumbo.

> **[Harbor Freight Tools – Quality Tools at Discount Prices Since 1977](https://www.harborfreight.com/catalogsearch/result/index/?dir=asc&ord)**
>
> Harbor Freight buys their top quality tools from the same factories that supply our competitors. We cut out the middleman and pass the savings to you!

See about getting different size plastic bins for bigger stuff as you find them on sale.

Shop around for assortment packs of components and IC chips -- they are the best way to flesh out your components.

Shop around for modules. Modules are cheaper than shields.

Check out DuPont cables instead of buying loose jumper wires. They come with male or female ends, when you want to jumper a header pin you want a female end. You peel as many wires as you need off the original 40 wires and have your own cables instead of a total rat nest.  
There's another kind of jumper I don't know the name of but they lay flat on the breadboard, can be a pain to insert (need needle nose pliers) and remove but they make far more solid breadboard connections than floppy jumpers.

> **[140 PIECE JUMPER WIRE ASSORTMENT](https://www.allelectronics.com/item/jw-140/140-piece-jumper-wire-assortment/1.html)**
>
> 140 piece assortment (10 of each size) of pre-formed jumper wires for use with solderless breadboards. 14 color-coded lengths. AWG 22 solid wire. Plastic storage case.

Brush up on your physics. There's a site called Hyperphysics that I have found very helpful.

Great that you can do the software and are accomplished with state machines (errr, finite that is).  
If you go through Nick Gammon's tutorials you can pick up on electronics and Arduino specifics in a subject you already know the rest of. The 3 addresses in my sig space at the bottom of this post make a good start but for you that whole section of his site should provide loads of interest on a number of topics.

Also, go through the whole Arduino main site and build a folder of bookmarks to every part that looks interesting for now or later. There is a rather hefty manual's worth of material on-site with much in The Playground (not all perfect but what is?).

Books... even Sam's has Arduino manuals.

---

<div class="post-metadata">

**Author:** ![GoForSmoke](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/goforsmoke/32/1127097_2.png) [@GoForSmoke](https://forum.arduino.cc/u/GoForSmoke)\
**Post date:** [July 11, 2017, 10:13pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/9 "2017-07-11T22:13:50Z")

</div>

> PaulRB:  
> In that case buy an Arduino that can plug into a breadboard. That means a Nano, Mini, Micro or similar, rather than an Uno, Mega or Due.

I like my Uno's because I can replace the 328P in them. Haven't needed to yet but if I burn a pin I don't need to chuck the board because I can't handle replacing surface mount chips.

I have a Nano and some Teensy's that do plug into breadboards. I have also programmed bare AVR chips plugged into breadboards. Once again, Nick makes it easier (with his software) and explains the full course:

> **[Gammon Forum : Electronics : Microprocessors : How to make an...](http://gammon.com.au/breadboard)**
>
> Gammon Forum : Electronics : Microprocessors : How to make an Arduino-compatible minimal board

---

<div class="post-metadata">

**Author:** ![mercmobily](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/mercmobily/32/797503_2.png) [@mercmobily](https://forum.arduino.cc/u/mercmobily)\
**Post date:** [July 12, 2017, 11:44am UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/10 "2017-07-12T11:44:34Z")

</div>

Wow... thank you. Seriously. I ended up getting the official Genuino Starter Kit (I happen to be in Italy right now, I got it dirt cheap). I don't think it comes with a multimetre, I will make sure to get one. It comes with a Arduino Uno V3, but I PROMISE I won't make a mess with the breadboard 😃

There is so much good advice here, I don't know where to start saying "thank you". I will let you know how far I get.

Thanks!

---

<div class="post-metadata">

**Author:** ![mercmobily](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/mercmobily/32/797503_2.png) [@mercmobily](https://forum.arduino.cc/u/mercmobily)\
**Post date:** [July 12, 2017, 12:14pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/11 "2017-07-12T12:14:42Z")

</div>

Hi,

"I have a Nano and some Teensy's that do plug into breadboards. I have also programmed bare AVR chips plugged into breadboards. Once again, Nick makes it easier (with his software) and explains the full course:  
[Gammon Forum : Electronics : Microprocessors : How to make an Arduino-compatible minimal board](http://gammon.com.au/breadboard)"

This is just pure awesome.

How do you actually end up making the circuits? When I was like 13, I used to make circuits by drawing on a blank and putting the think in acid -- only the covered part would erode, and you ended up with a circuit.

We are talking like 30 years ago. It didn't look very safe for today's standards. Is that still how it's done?  
(I am just being curious)

Merc.

---

<div class="post-metadata">

**Author:** ![bDeters](https://avatars.discourse-cdn.com/v4/letter/b/f08c70/32.png) [@bDeters](https://forum.arduino.cc/u/bDeters)\
**Post date:** [July 12, 2017, 4:02pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/12 "2017-07-12T16:02:21Z")

</div>

> mercmobily:  
> How do you actually end up making the circuits? When I was like 13, I used to make circuits by drawing on a blank and putting the think in acid -- only the covered part would erode, and you ended up with a circuit.

You can actually still do that, but there are several methods that are cost effective, fast, and/or less chance of spilling acid. There's a whole thread dedicated to cheap PCB manufacturing [here](https://forum.arduino.cc/index.php?topic=117639.90) and free software to do the layout as well. Just a few bucks is possible.

You can also use a CNC mill to cut out copper substrate at home. Thanks to the explosion in 3D printing the cost of hobbyist CNC machines has come way down. They even have conductive filament for the 3D printers to embed circuits in complex shapes.

Conductive ink, threads for the artistic community if you want to embed the device in art or clothing.

Probably others, too.

---

<div class="post-metadata">

**Author:** ![wvmarle](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/wvmarle/32/1013044_2.png) [@wvmarle](https://forum.arduino.cc/u/wvmarle)\
**Post date:** [July 12, 2017, 5:18pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/13 "2017-07-12T17:18:37Z")

</div>

I have here two boxes of capacitors (lots of different values) and a bag of resistors (30 values, 10 pcs of each). Got those for next to nothing (including shipping must have been \<15 USD equivalent) off Taobao. Very convenient to have all those values around; you never know when they come in handy. Common resistor values (10k, 1k, 330R for the LEDs) I bought as 1000-pc bag for the equivalent of \<1 USD. Crazy cheap those things.

A bag of LEDs also always comes in handy. For actual use (make things look pretty), and for testing purposes (makes a port level visible).

Transistors or MOSFETs for switching higher loads (as in higher than a single LED).

Then a solderless breadboard or two, plus a good set of jumper wires. Can't have too many of those. Get some male/male, male/female and female/female. Always useful for connecting stuff together.

Power supply, very important. 3.3V and 5V are common voltages you'll need, where 5V is for the Arduino and 3.3V is for just about everything else.

A multimeter. Digital is popular, I'm still too much in love with my analog one. Very useful for testing.

The above that's the basics you'll need for most projects.

Sensors and other components you buy depending on whatever you want to build. Over time you'll build up a nice collection. Don't be afraid to order something you're not too sure of as long as it's inexpensive, you'll likely find a use for it sooner or later.

---

<div class="post-metadata">

**Author:** ![GoForSmoke](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/goforsmoke/32/1127097_2.png) [@GoForSmoke](https://forum.arduino.cc/u/GoForSmoke)\
**Post date:** [July 12, 2017, 6:09pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/14 "2017-07-12T18:09:30Z")

</div>

> mercmobily:  
> HHow do you actually end up making the circuits?

[http://make.kosakalab.com/arduino/obaka/project-2/index\_en.html](http://make.kosakalab.com/arduino/obaka/project-2/index_en.html)

I'm a bit more conservative. I think of wiring up a socket and putting the AVR in that. If the socket has extra holes, all the better, many component leads and jumpers plug snug into socket holes. I haven't tried but wire wrap sockets would likely be easier.

The minimal circuit for a running AVR is PWR, GND, bypass cap. That's internal oscillator, reset disabled and no IO which makes it pretty dull but it will run! A pin for a status led, another for a sensor, add header pins to the socket and cables can slide right on. Heck, I've embedded components into cables and completely covered them in heat shrink tube -- if you don't know about heat shrink tube then look it up and be sure to get an assortment pack! Don't use electrical tape to insulate your work!

There's whole family lines of AVR's with many in DIP form, you can get a final target chip to fit your needs if any will do. They all have the same core but differ on features. The DIP AVR's run from 6 pins to 40, from 128 or less bytes of RAM to 16KB RAM.

---

<div class="post-metadata">

**Author:** ![wvmarle](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/wvmarle/32/1013044_2.png) [@wvmarle](https://forum.arduino.cc/u/wvmarle)\
**Post date:** [July 13, 2017, 9:17am UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/15 "2017-07-13T09:17:15Z")

</div>

If you go the DIP route, definitely get a solderless breadboard as those DIP packages plug right in, and then you can easily connect everything else by just plugging it in.

---

<div class="post-metadata">

**Author:** ![GoForSmoke](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/goforsmoke/32/1127097_2.png) [@GoForSmoke](https://forum.arduino.cc/u/GoForSmoke)\
**Post date:** [July 13, 2017, 4:56pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/16 "2017-07-13T16:56:31Z")

</div>

That reminds me. I need to buy another pack of medium-small breadboards. Last time I got one was in 2012.

When you order breadboards take care, some have 2mm hole spacing (I have one, it's useless to me.) where you want 2.54mm (0.1 inch) spacing. Same goes with connectors that look like standard but aren't.

OP - physics covers electricity and electronics, electric field, capacitance, electrons and basis of how all that behaves.  
You don't have to learn it all to begin to get real benefits.

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [May 5, 2021, 6:17pm UTC](https://forum.arduino.cc/t/best-kit-for-developer-turning-into-maker/469505/17 "2021-05-05T18:17:16Z")

</div>

Closed on May 5, 2021, 6:17pm UTC


