Bike interface OBD

Other Hardware Device Hacking
357

We are currently testing the ELMduino library to connect the ESP32 to the ELM327 via Bluetooth, and then request the PIDs. We are using a test code from GitHub with a car, but the ESP32 is unable to connect to the ELM327 via Bluetooth. I have tried everything, but nothing seems to work. Does anyone know what might be causing this issue? Here are the codes I am using.

/*
To test connection, type the following into the serial monitor:
  AT Z
  AT E0
  AT S0
  AT AL
  AT TP A0
*/

#include "BluetoothSerial.h"


BluetoothSerial SerialBT;


#define DEBUG_PORT Serial
#define ELM_PORT   SerialBT


void setup()
{
  pinMode(LED_BUILTIN, OUTPUT);
  digitalWrite(LED_BUILTIN, HIGH);

  DEBUG_PORT.begin(115200);
  ELM_PORT.begin("ESP32test", true);
  //ELM_PORT.setPin("1234");

  DEBUG_PORT.println("Attempting to connect to ELM327...");

  if (!ELM_PORT.connect("OBDII"))
  {
    DEBUG_PORT.println("Couldn't connect to OBD scanner");
    while(1);
  }

  DEBUG_PORT.println("Connected to ELM327");
  DEBUG_PORT.println("Ensure your serial monitor line ending is set to 'Carriage Return'");
  DEBUG_PORT.println("Type and send commands/queries to your ELM327 through the serial monitor");
  DEBUG_PORT.println();
}


void loop()
{
  if(DEBUG_PORT.available())
  {
    char c = DEBUG_PORT.read();

    DEBUG_PORT.write(c);
    ELM_PORT.write(c);
  }

  if(ELM_PORT.available())
  {
    char c = ELM_PORT.read();

    if(c == '>')
      DEBUG_PORT.println();

    DEBUG_PORT.write(c);
  }
}

and this

#include "BluetoothSerial.h"
#include "ELMduino.h"


BluetoothSerial SerialBT;
#define ELM_PORT   SerialBT
#define DEBUG_PORT Serial


ELM327 myELM327;


uint32_t rpm = 0;


void setup()
{
#if LED_BUILTIN
  pinMode(LED_BUILTIN, OUTPUT);
  digitalWrite(LED_BUILTIN, LOW);
#endif

  DEBUG_PORT.begin(115200);
  //SerialBT.setPin("1234");
  ELM_PORT.begin("ArduHUD", true);
  
  if (!ELM_PORT.connect("OBDII"))
  {
    DEBUG_PORT.println("Couldn't connect to OBD scanner - Phase 1");
    while(1);
  }

  if (!myELM327.begin(ELM_PORT, true, 2000))
  {
    Serial.println("Couldn't connect to OBD scanner - Phase 2");
    while (1);
  }

  Serial.println("Connected to ELM327");
}


void loop()
{
  float tempRPM = myELM327.rpm();

  if (myELM327.nb_rx_state == ELM_SUCCESS)
  {
    rpm = (uint32_t)tempRPM;
    Serial.print("RPM: "); Serial.println(rpm);
  }
  else if (myELM327.nb_rx_state != ELM_GETTING_MSG)
    myELM327.printError();
}```