Binary received uncorrectly by the board: SHA256 mismatch

Development Tools Cloud IoT
1

I am using a nano33iot board while uploading I used a USB cable, later kept the power on the same cable, but changed the network of the laptop to another1, so now nano33 is on the 1network, as set while setup & IoT cloud is on another network, now I did sm changes in prog & tried to upload on OTA. to receive abv msg. i tried many times & then now posting the same on the forum.

2

Unable to verify OTA: the board didn't answer after reboot
is the new msg after I tried restarting of IoT cloud on web browser

3

Please copy and paste the entire error message in a new post.

4

Binary received uncorrectly by the board: SHA256 mismatch
this was 1st1

Unable to verify OTA: the board didn't answer after reboot
this was another 1

1 Like
6

I've done a couple of OTA this morning on my nano 33 IoT and all looks fine. If you are getting these errors consistently consider to share your sketch and the complete debug output.

Thanks.

7

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.