Blinking LED sketch to work on Arduino DUE

Development Tools IDE 1.x
1

Hi -

It seems I got a problem in my Arduino DUE.

I followed the instruction to connect the board. "ON" and "L" lights are on.

I got the following message on Serial Monitor:

Sketch uses 10,340 bytes (1%) of program storage space. Maximum is 524,288 bytes.
Erase flash
Write 10420 bytes to flash

[ ] 0% (0/41 pages)
[======= ] 24% (10/41 pages)
[============== ] 48% (20/41 pages)
[===================== ] 73% (30/41 pages)
[============================= ] 97% (40/41 pages)
[==============================] 100% (41/41 pages)
Verify 10420 bytes of flash

[ ] 0% (0/41 pages)
[======= ] 24% (10/41 pages)
[============== ] 48% (20/41 pages)
[===================== ] 73% (30/41 pages)
[============================= ] 97% (40/41 pages)
[==============================] 100% (41/41 pages)
Verify successful
Set boot flash true
CPU reset.

I spent time trying to get solutions, but it seems it is a common issue for others without a solution.

HELP ME! What should I do? Can you ship another one to me?

Thanks,
Michael

2

changks:
It seems I got a problem in my Arduino DUE.

You haven't stated the problem.

changks:
I got the following message on Serial Monitor:

To avoid confusion: That is not the serial monitor. That is the output console. The serial monitor is different and must be opened separately.

changks:
Verify successful
Set boot flash true
CPU reset.

This is not an error.

changks:
HELP ME! What should I do? Can you ship another one to me?

This is not a customer service support forum. If you want a return, you should contact the seller directly.