Hi,
there is my master and slave configuration AT commands
SLAVE-1 HC-05
AT+ADDR?
+ADDR:98D3:31:F636DE
AT+PIN="1234"
+OK
SLAVE-2 HC-05
AT+ADDR?
+ADDR:98D3:31:A001DE
AT+PIN="5555"
+OK
MASTER HC-05
AT+ROLE=1 -> FOR MASTER
+OK
AT+CMODE=0 -> FOR ONLY CONNECT BINDED SLAVES
+OK
AT+PIN="1234"
AT+PAIR=98D3:31:F636DE,99
+OK
AT+BIND=98D3:31:F636DE
+OK
After this commands, normally master only connect to slave 1 (binded, cmode=0 and same pin)
but if slave 1 not available (without powered) master connecting to slave 2 (with not binded and wrong pin) and stop searching.
if i powering slave 1, after paired master between slave 2
slave 1 doing nothing never connect to master like as configured
is there any clue how to master reject other slaves instead connection slave1
Thank You