Bourns encoder project

oqibidipo · July 9, 2025, 7:36pm

Add #define ACE128_ARDUINO_PINS before including ACE128.h
or uncomment some of these:
(Don't believe line 17.)

src/ACE128.h

master


      
          // Use these preprocessor #define statements to configure you project. 
          // Uncomment them here to set them for all projects
          // Unfortuately due to the wierdness of the Arduino IDE, #defines in your sketch don't propagate here
          
          // Set up the EEPROM storage option. 
          // Include ONE of these to override default behavior
          // #define ACE128_EEPROM_AVR  // Internal EEPROM.h This is the default for AVR e.g. Arduino Uno, AtTiny ATmega ATtiny etc
          // #define ACE128_EEPROM_NONE // No EEPROM storage - default for non-AVR e.g. MKR series, SAM
          // #define ACE128_EEPROM_I2C  // I2C EEPROM - e.g.  Microchip 24CW160T
          // #define ACE128_EEPROM_ADDR 0x50  // address for the I2C chip. If you leave this undefined it defaults to 0x50
          
          // Enable MCP23008 support. 
          // Before v2.0.0 this was available by default. Now you need to set this flag.
          // #define ACE128_MCP23008 // Enable MCP23008 support
          
          // Use direct pin connection, disable pin expander code
          // Also disables all I2C activity unless ACE128_EEPROM_I2C is defined
          // Prior to v2.0.0 this was available by default along with the pin expanders
          // #define ACE128_ARDUINO_PINS
          
          // end of user configurable #define statements

Topic		Replies	Views
Bourns EAW Encoder I2C Issues Programming	3	775	May 6, 2021
Simple stepper control using Bourns rotary encoder & LCD Programming	10	2369	May 6, 2021
Simple stepper control using Bourns rotary encoder & LCD V2 Programming	8	772	August 10, 2021
Bourns encoder gives random values Programming	6	726	May 6, 2021
having trouble with an encoder and atmega 1284p. please help Programming	3	1048	May 5, 2021

Bourns encoder project

Related topics