brightsign to stepper?

Hi!

Trying to connect brightsign player HD223 to Arduino Uno R3.

The purpose is to make player to control stepper motor. For example, while running video player sends timeout signals to stepper through arduino to make a certain quantity of movements.

I use this stepper http://amperka.ru/product/stepper-motor-nema17-42sth47-0406a

and the driver for it http://amperka.ru/product/troyka-stepper-motor-driver

So I've connected stepper to arduino according to this scheme Драйвер шагового двигателя (Troyka-модуль) [Амперка / Вики] with the code written below and it works.

Now I need to connect player's gpio to my arduino...So I hardly understand what pins of player (gnd, vcc and button_0 OR only gnd and button_0) I shold connect to arduino and what pins of arduino I should use.

Hope for help)

DON'T CROSS POST!!!!!!!!!!!!!!!!!!!!
http://forum.arduino.cc/index.php?topic=582799
I HAVE REPORTED THIS THREAD TO THE MODERATORS

Duplicate posts waste the time of the people helping you. I might spend 15 minutes writing a detailed answer on this thread, without knowing that someone already did the same in the other thread. This behavior is very disrespectful to the people you're asking for assistance. Just because we give our time freely doesn't mean it has no value.

In the future, take some time to pick the forum section that best suits the topic of your question and then only post once to that forum section. This is basic forum etiquette, which you would already know if you had bothered reading the sticky "How to use this forum - please read." post you will find at the top of every forum section. It contains a lot of other useful information. Please read it.

Ok, sorry
I didn't find the button to delete the topic http://forum.arduino.cc/index.php?topic=582799

I wish to save this post and delete the other one

Sorry(

krtklest:
Trying to connect brightsign player HD223

What is that?

Please post a link to its datasheet.

...R

Shure)
Here is the link https://www.brightsign.biz/digital-signage-products/HD-product-line/HD223#features

There is a datasheet on this page

That "datasheet" just seems to be a marketing flier. Don't you have a link to a document that explains in detail how to interface to the device?

...R

Thanks for your interest!

Here is what I found

http://docs.brightsign.biz/display/DOC/HD223%2C+HD1023

I also have XT1143
This one have more outputs and maybe it could be more useful

http://docs.brightsign.biz/display/DOC/XT243%2C+XT1143

What have you tried yourself, and what happened?

I don't have the hardware so you need to do the testing.

In your Original Post you said

For example, while running video player sends timeout signals to stepper through arduino to make a certain quantity of movements.

I can't see anything in any of your links that suggests a connection on the device that is designed for that. The connections seem only to be intended for controlling the Brightsign device.

...R