Broadcom Ble Dongal Error : Can't init device hci0: Connection timed out (145)

Hi All,

I followed all instructions from the earlier reply, Broadcom BLE-Dongal is setup correctly see below

root@Arduino5: lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub Bus 001 Device 003: ID 0a5c:21e8 Broadcom Corp. BCM20702A0 Bluetooth 4.0 Bus 001 Device 004: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader

root@Arduino5: hciconfig hci0: Type: BR/EDR Bus: USB ** BD Address: 00:02:72:D9:E8:00 ACL MTU: 1021:8 SCO MTU: 64:1** ** DOWN** ** RX bytes:489 acl:0 sco:0 events:20 errors:0** ** TX bytes:86 acl:0 sco:0 commands:32 errors:12**

root@Arduino5:hciconfig hci0 up Can't init device hci0: Connection timed out (145)

I am getting this error when I use hciconfig hci0 up : not able to configure the same.

Any Pointers is greatly appreciated

Sincere Regards


One of possible, since Yun USB only give out ~4.5V, try with powered USB hub.