I have a bug with the arduino 1.0.1 IDE I have 2 brushless controllers, which require 1-2ms of pulses. So i write BLDC_us=1500; and I get nothing, so I measured with digital signal osciloscope, and it was actually 2000us. Now I have to use Kproportional=0.75 to change it. In software 1500*0.75=112…

BUG delayMicroseconds(input), output=input/0.75

system December 16, 2012, 8:16pm 5

Have you tried the Servo library?

Topic		Replies	Views
Blink 1 sec ,Using delayMicrosecond(); Programming	8	2411	May 5, 2021
DelayMicroseconds w/ digitalWrite timing accuracy Programming	7	4179	May 5, 2021
found bug in delayMicroSeconds when called with 0; Libraries	12	8605	May 6, 2021
Blink without delay and micros Syntax & Programs	1	2327	May 6, 2021
Uso DelayMicroseconds Software	3	1802	May 7, 2021