Burning Bootloader to Severino 328P

Forum 2005-2010 (read only) Hardware Troubleshooting
#1

Hi People,

I am following this link to build my first arduino board using a parallel cable, it's a severino:

www.arduino.cc/en/Main/ArduinoBoardSerialSingleSided3

But the proccess for burn bootloader isn't work .

I'm getting this error:

avrdude: AVR device not responding avrdude: initialization failed, rc=-1 avrdude: Yikes! Invalid device signature. avrdude: Expected signature for ATMEGA328P is 1E 95 0F avrdude: AVR device not responding ***failed; avrdude: verification error, first mismatch at byte 0x0000 0x3f != 0x00 avrdude: verification error; content mismatch

Anyone already tried to use a ATMEGA 328P on Severino boarder ? It works ?

Anyone has any help ?

Thanks Victor Jabur

#2

I guess that my problem is the low voltage at my parallel port (3,36 V).

Anyone has any recomendation ?

This voltage could be yhe problem for my wrong bootloader ?

Thanks Victor Jabur

#3