// Define the number of samples to keep track of. The higher the number,
// the more the readings will be smoothed, but the slower the output will
// respond to the input. Using a constant rather than a normal variable lets
// use this value to determine the size of the readings array.
const int numReadings = 100;
int readings[numReadings]; // the readings from the analog input
int index = 0; // the index of the current reading
int total = 0; // the running total
int average = 0; // the average
int temperature = 0;
int temperaturePin = A0;
void setup()
{
// initialize serial communication with computer:
Serial.begin(9600);
// initialize all the readings to 0:
for (int thisReading = 0; thisReading < numReadings; thisReading++)
readings[thisReading] = 0;
}
void loop() {
// subtract the last reading:
total= total - readings[index];
// read from the sensor:
temperature = getVoltage(temperaturePin); //getting the voltage reading from the temperature sensor
readings[index] = temperature;
// add the reading to the total:
total= total + readings[index];
// advance to the next position in the array:
index = index + 1;
// if we're at the end of the array...
if (index >= numReadings)
// ...wrap around to the beginning:
index = 0;
// calculate the average:
average = total / numReadings;
// average = temperature;
// temperature = getVoltage(temperaturePin); //getting the voltage reading from the temperature sensor
temperature = (temperature - 0.42) * 100; // converting from 10 mv per degree with 500 mV offset
temperature = (((temperature*1.8)+32)-6.5); // convert c to f
// send it to the computer as ASCII digits
Serial.println(average);
Serial.print(temperature); //printing the result
Serial.println(" f");
delay(1000);
}
/*
* getVoltage() - returns the voltage on the analog input defined by
* pin
*/
float getVoltage(int pin){
return (analogRead(pin) * .004882814); //converting from a 0 to 1023 digital range
// to 0 to 5 volts (each 1 reading equals ~ 5 millivolts
}
[code]
[/code]