I have two DUE, where I got an error when uploading. I have uploaded max 500 programs to them, but in order to check, if the programmemory is defect, I would like to use another part of the memory for my program.
Is it possible to tel the uploader to use another part of the memory?
And if yes how!
Even though you're not asking for help with the upload error, it still might be useful to provide the error message for context:
KG_DK:
I have a DUE, whitch until now worked well, but now I can't upload the SW to the board.
When trying to upload, it say:Send auto-baud
No device found on COM10
Set binary mode
An error occurred while uploading the sketch
I have posted the error here:
https://forum.arduino.cc/index.php?topic=512951.0
(More:Modify used to add url & /url tags to make the link clickable - Moderator)
if you use this web site and look up progmem you will find info for storing data to eprom ,flash and sram on arduino there is a header file you include at the beginning of your sketch look under learning tab reference
OK, but my problem is not space in the RAM or PROGMEM, but to upload anything to the processor.
No device found on COM10
Even if you could load the program into another memory area the IDE would need to be able to communicate with the board.
Does your PC have a COM10 ?
Can you see COM10 in the IDE ?
Does the port disappear if you unplug the Arduino and appear again when you plug it back in ?
Delta_G:
You ask for the error, and i feel, that I write the problem in the first 'comment'.
I started this thread because I think, that it is a new sublject.
I beg your pardon, but I don't know how to make a link clickable.
UKHeliBob:
Yes to all question.
After all I think, that the Flash-memory is burned out, so I have to buy a new board or a new processor.
To make a link clickable, use url tags, or the button in the menu that looks like an infinity sign. Mouse over them, it's the one that says "insert a link".Ends up like this:
http://www.crossroadsfencing.com/Bobuino17/
Use img tags to insert an image, or the "insert an image" button, here's my Standalone Programmer from SD card for example.
Thank you!