can not find tinyusb

Development Tools IDE 1.x
1

I've tried connecting to a gemma v2, and now recently the Flora. I even upgraded from windows 7 to windows 10 to see if it would help. I think I have read and tried and downloaded every suggestion so far.

My board lights up green, red led is blinking nicely. I'm using a usb 2.0 I have tried every usb connector on the computer and every usb cord I have. My usb list in my device manager never changes to select and manually update a driver. I have rolled back the drivers. I have downloaded every driver. I'm really kinda shocked this is such a simple problem. Plug it in and it doesn't even communicate that a new device is present.

Help???

Want more?

Arduino: 1.8.5 (Windows 10), Board: "Arduino Gemma"

Sketch uses 3050 bytes (57%) of program storage space. Maximum is 5310 bytes.
Global variables use 39 bytes of dynamic memory.
C:\Users\Owner\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino9/bin/avrdude -CC:\Users\Owner\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino9/etc/avrdude.conf -v -pattiny85 -cusbtiny -Uflash:w:C:\Users\Owner\AppData\Local\Temp\arduino_build_844680/strandtest.ino.hex:i 

avrdude: Version 6.3, compiled on Jan 17 2017 at 12:00:53
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "C:\Users\Owner\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino9/etc/avrdude.conf"

         Using Port                    : usb
         Using Programmer              : usbtiny
avrdude: Error: Could not find USBtiny device (0x1781/0xc9f)

avrdude done.  Thank you.

the selected serial port 
 does not exist or your board is not connected

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

The board is connected and green. Red led is flashing

2

(deleted)

3

if I tap the reset, the red led flashes slower for about 5 seconds.

4 
Arduino: 1.8.5 (Windows 10), Board: "Adafruit Flora"

Sketch uses 6646 bytes (23%) of program storage space. Maximum is 28672 bytes.
Global variables use 180 bytes of dynamic memory.
Forcing reset using 1200bps open/close on port COM1
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
PORTS {COM1, } / {COM1, } => {}
Uploading using selected port: COM1
C:\Users\Owner\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino9/bin/avrdude -CC:\Users\Owner\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino9/etc/avrdude.conf -v -patmega32u4 -cavr109 -PCOM1 -b57600 -D -Uflash:w:C:\Users\Owner\AppData\Local\Temp\arduino_build_395433/sketch_may02a.ino.hex:i 

avrdude: Version 6.3, compiled on Jan 17 2017 at 12:00:53
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "C:\Users\Owner\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino9/etc/avrdude.conf"

         Using Port                    : COM1
         Using Programmer              : avr109
         Overriding Baud Rate          : 57600
         AVR Part                      : ATmega32U4
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PA0
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    20     4    0 no       1024    4      0  9000  9000 0x00 0x00
           flash         65     6   128    0 yes     32768  128    256  4500  4500 0x00 0x00
           lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : butterfly
         Description     : Atmel AppNote AVR109 Boot Loader

Connecting to programmer: .avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
Found programmer: Id = "F"; type = @
    Software Version = å.s; Hardware Version = “.ð
avrdude: butterfly_recv(): programmer is not responding
avrdude: butterfly_recv(): programmer is not responding
avrdude: error: buffered memory access not supported. Maybe it isn't
a butterfly/AVR109 but a AVR910 device?
avrdude: initialization failed, rc=-1
         Double check connections and try again, or use -F to override
         this check.

avrdude: butterfly_recv(): programmer is not responding
avrdude: error: programmer did not respond to command: leave prog mode
avrdude: butterfly_recv(): programmer is not responding
avrdude: error: programmer did not respond to command: exit bootloader

avrdude done.  Thank you.

the selected serial port 
 does not exist or your board is not connected

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

still not reaching the board. I've downloaded so much, installed and updated. Seems odd I only have com1 option.

5

(deleted)

6

I'm having the same issue with a Gemma V.2

I set up this Gemma V.2 about 3 years ago with no problem. I'm now on Windows 10 and Arduino can't seem to find the Gemma V.2 board. I also tried using the Web version of the editor and the Gemma V.2 isn't an option when selecting boards.

Am I missing something? All drivers, libraries, etc. are installed as far as I can tell. Does the Gemma V.2 show up under a different name on the Web editor?

I didn't start a new thread since this one was relatively recent as far as issues go. Thanks in advance if anyone responds.

7

@DonutNinja

The boards list for CREATE is limited still.
They are adding more boards currently but it is a slow process as Arduino dont own the rights to many third party boards.

For your purpose you should concentrate on the desktop IDE.