# Cannot adapt Arduino code to ESP8266

**URL:** <https://forum.arduino.cc/t/cannot-adapt-arduino-code-to-esp8266/1253013>\
**Category:** Programming\
**Created:** [April 28, 2024, 2:17am UTC](https://forum.arduino.cc/t/cannot-adapt-arduino-code-to-esp8266/1253013 "2024-04-28T02:17:17Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![johnerrington](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/johnerrington/32/340106_2.png) [@johnerrington](https://forum.arduino.cc/u/johnerrington)\
**Post date:** [April 28, 2024, 5:47am UTC](https://forum.arduino.cc/t/cannot-adapt-arduino-code-to-esp8266/1253013/4 "2024-04-28T05:47:50Z")

</div>

Try this - see if the serial output is correct

```arduino
/*
 * This ESP8266 NodeMCU code was developed by newbiely.com
 *
 * This ESP8266 NodeMCU code is made available for public use without any restriction
 *
 * For comprehensive instructions and wiring diagrams, please visit:
 * https://newbiely.com/tutorials/esp8266/esp8266-serial-monitor
 */

void setup() {
  Serial.begin(9600); //why does NOBODY use a modern baud rate?
}

void loop() {
  Serial.println("ArduinoGetStarted.com");
  delay(1000);
}

```

---

_[View the full topic](https://forum.arduino.cc/t/cannot-adapt-arduino-code-to-esp8266/1253013)._