Hi,
I loaded a Zephyr image on my Nicla Sense ME and not I can not get the Arduino IDE to load a Sketch to the board.
I have tried double pressing the reset button before loading the Arduino Blink for Nicla Sense ME code but no LEDs blink. The serial output still shows what was loaded from the Zephyr image.
Any ideas?
The ME is recognized from the Arduino IDE:
The is the output of loading the image from the Arduino IDE:
Sketch uses 56012 bytes (10%) of program storage space. Maximum is 527616 bytes.
Global variables use 12256 bytes (19%) of dynamic memory, leaving 52032 bytes for local variables. Maximum is 64288 bytes.
Open On-Chip Debugger 0.11.0+dev-gab95bac57-dirty (2021-05-11-10:45)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
debug_level: 0
adapter speed: 1000 kHz
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x000006c8 msp: 0x20001140
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x000006c8 msp: 0x20001140
** Programming Started **
** Programming Finished **
shutdown command invoked