Cannot Stack other shields on top of the Arduino YUN

Anyone else notice this? The ethernet and usb host ports are too high and don't allow a shield to mate properly on top of the board. Seems like this board should have been designed with a little more length to allow them to be push out enough so that these ports properly clear a shield. :roll_eyes:

Arduino shields use 15mm pins. If your shield is using shorter pins, consider buying some extension headers

Standard shields do indeed have a conflict with the ethernet connector. My simple 'fix' was to stack an extra set of stackable headers...

I found 14.5/15mm stackable headers for the 10/8/1x6 headers, but the 2x3 ICSP one I have not been able to find - does anyone know of a manufacturer's part number for this one? I live in the US so Jameco, Digikey, Anthem, etc are the vendors I would likely use - paying 10x the price for a part to have it shipped from the EU would be a bit silly :-)

TIA

spdonegan: I found 14.5/15mm stackable headers for the 10/8/1x6 headers, but the 2x3 ICSP one I have not been able to find - does anyone know of a manufacturer's part number for this one? I live in the US so Jameco, Digikey, Anthem, etc are the vendors I would likely use - paying 10x the price for a part to have it shipped from the EU would be a bit silly :-)

TIA

A quick application of Google-Foo found these http://www.ebay.com/itm/like/150821449887?lpid=82, 20pcs for $10... ;-)

And this outfit in the Pacific Northwest sells them for $1.50 a pop... 8) http://www.vetco.net/catalog/product_info.php?products_id=13759

Ralf