Cannot upload Sketch after burning bootloader with ATMEL Studio 7 and AVRISP MKI

I have burn bootloader optiboot on genuine Arduino NANO with the proper hex file (optiboot_atmega328.hex) and fuses; Extended 0x05, High 0xDE, Low 0xFF. All hardware is detected and verify message OK! After trying upload sketch "Blink" with Arduino 1.8.1 no upload done and message display:

avrdude: Version 6.3, compiled on Jan 17 2017 at 12:00:53 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2014 Joerg Wunsch System wide configuration file is "C:\Users...\AppData\Local\Arduino15\packages\arduino\tools\avrdude\6.3.0-arduino9/etc/avrdude.conf" Using Port : COM4 Using Programmer : arduino Overriding Baud Rate: 57600 avrdude: stk500_getsync(): not in sync: resp=0x1b -> 10 trials

Need help.