I'm trying to upload a sketch from the Web Editor onto an UNO Wifi v2. I'm fairly certain the Chromebook is communicating to board. I can upload the same sketch to the same UNO on a PC.
Below is the info from the bottom box...
/usr/local/bin/arduino-cli compile --fqbn arduino:megaavr:uno2018:mode=on --build-cache-path /tmp --output-dir /tmp/617846814/build --build-path /tmp/arduino-build-04499E91765E899BF059DA78A50513D6 /tmp/617846814/sketch_LEDs_ArduinoLab
Sketch uses 5476 bytes (11%) of program storage space. Maximum is 48640 bytes.
Global variables use 58 bytes (0%) of dynamic memory, leaving 6086 bytes for local variables. Maximum is 6144 bytes.
Upload started
Programming with: avrgirl-arduino-patched flash -f sketch_LEDs_ArduinoLab.hex -a unowifirev2 -p /dev/ttyACM0
connected
reset complete.
flashing, please wait...
flash complete.
Programming with: avrgirl-arduino-patched flash -f sketch_LEDs_ArduinoLab.hex -a unowifirev2 -p /dev/ttyACM0
connected
reset complete.
flashing, please wait...
flash complete.
Programming with: avrgirl-arduino-patched flash -f sketch_LEDs_ArduinoLab.hex -a unowifirev2 -p /dev/ttyACM0
connected
reset complete.
flashing, please wait...
flash complete.
Programming with: avrgirl-arduino-patched flash -f sketch_LEDs_ArduinoLab.hex -a unowifirev2 -p /dev/ttyACM0
connected
reset complete.
flashing, please wait...
flash complete.
Programming with: avrgirl-arduino-patched flash -f sketch_LEDs_ArduinoLab.hex -a unowifirev2 -p /dev/ttyACM0
connected
reset complete.
flashing, please wait...
flash complete.
Programming with: avrgirl-arduino-patched flash -f sketch_LEDs_ArduinoLab.hex -a unowifirev2 -p /dev/ttyACM0
connected
reset complete.
flashing, please wait...
flash complete.
Programming with: avrgirl-arduino-patched flash -f sketch_LEDs_ArduinoLab.hex -a unowifirev2 -p /dev/ttyACM0
connected
reset complete.
flashing, please wait...
flash complete.
Programming with: avrgirl-arduino-patched flash -f sketch_LEDs_ArduinoLab.hex -a unowifirev2 -p /dev/ttyACM0
connected
reset complete.
flashing, please wait...
flash complete.
Programming with: avrgirl-arduino-patched flash -f sketch_LEDs_ArduinoLab.hex -a unowifirev2 -p /dev/ttyACM0
connected
reset complete.
flashing, please wait...
flash complete.
Programming with: avrgirl-arduino-patched flash -f sketch_LEDs_ArduinoLab.hex -a unowifirev2 -p /dev/ttyACM0
connected
reset complete.
flashing, please wait...
flash complete.