# Cannot Upload To Nano Every **URL:** \ **Category:** Nano Every\ **Created:** [September 14, 2024, 3:02pm UTC](https://forum.arduino.cc/t/cannot-upload-to-nano-every/1301603 "2024-09-14T15:02:02Z")\ **Posts on this page:** 1\ **Showing post:** 37
**Author:** ![pert](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/pert/32/217111_2.png) [@pert](https://forum.arduino.cc/u/pert)\ **Post date:** [September 17, 2024, 3:53am UTC](https://forum.arduino.cc/t/cannot-upload-to-nano-every/1301603/37 "2024-09-17T03:53:54Z")
@ace595 has created a dedicated topic for discussion of the problem uploading to the UNO R4 Minima board: > [@Failed to retrieve language identifiers, exit status 74](https://forum.arduino.cc/t/failed-to-retrieve-language-identifiers-exit-status-74/1302350): > > I have a brand new R4 Minima which is recognized by the computer at COM 8, but when I upload my sketch, it gives me this error, I'm using the IDE 2.3.2 Sketch uses 41784 bytes (15%) of program storage space. Maximum is 262144 bytes. Global variables use 4352 bytes (13%) of dynamic memory, leaving 28416 bytes for local variables. Maximum is 32768 bytes. dfu-util 0.11-arduino4 Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. Copyright 2010-2021 Tormod Volden and Stefan Schmi… Please use that topic for any discussion related to the UNO R4 Minima, and this topic for any discussion related to the Nano Every. --- _[View the full topic](https://forum.arduino.cc/t/cannot-upload-to-nano-every/1301603)._