double check you pin-1. make sure it is the correct end.
RS is 4 in from the end [ op's ]
pin 14 is on the end closest to the screw
pin 16 is in the middle, then pin 15, and THEN pin-1
so RS is 6 pins in. from the center 'end'
LCD.bmp (383 KB)
double check you pin-1. make sure it is the correct end.
RS is 4 in from the end [ op's ]
pin 14 is on the end closest to the screw
pin 16 is in the middle, then pin 15, and THEN pin-1
so RS is 6 pins in. from the center 'end'
LCD.bmp (383 KB)
