can't upload

Hey all,

I just got my Arduino board today and I tired to upload the "Blink" sketch. No dice. So, as instructed by the troubleshooting guide, I'm posting here.

Operating System: Mac OS 10.4.9 running Arduino 0015
Arduino Board: Arduino Duemilanove w/ ATMEGA 328
Ever uploaded before?: No
Error Message with upload.verbose set to "true":
Binary sketch size: 976 bytes (of a 30720 byte maximum)
hardware/tools/avr/bin/avrdude -Chardware/tools/avr/etc/avrdude.conf -v -v -v -v -pm328p -cstk500v1 -P/dev/cu.modem -b57600 -D -Uflash:w:/Users/iansmith/Documents/Arduino/sketch_090521a/applet/sketch_090521a.hex:i

avrdude: Version 5.4-arduino, compiled on Oct 9 2007 at 11:22:08
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

System wide configuration file is "hardware/tools/avr/etc/avrdude.conf"
User configuration file is "/Users/iansmith/.avrduderc"
User configuration file does not exist or is not a regular file, skipping

Using Port : /dev/cu.modem
Using Programmer : stk500v1
Overriding Baud Rate : 57600
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Recv: 0 [30]
avrdude: stk500_getsync(): not in sync: resp=0x30
avrdude: Send: Q [51] [20]
avrdude: Recv: Q [51]
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

avrdude done. Thank you.

So, there we go. Can anyone help me?

-Ian Smith

headdesk It would help if I had downloaded the driver. Problem fixed. That was such a noob thing to do.