Can't wire my stepper motor to make it work!

Other Hardware Motors, Mechanics, Power and CNC
11

Thank for your help Robin :slight_smile: here is exactly what i tried to play ...

/*
Stepper Motor Control - one revolution

This program drives a unipolar or bipolar stepper motor.
The motor is attached to digital pins 8 - 11 of the Arduino.

The motor should revolve one revolution in one direction, then
one revolution in the other direction.

Created 11 Mar. 2007
Modified 30 Nov. 2009
by Tom Igoe

*/

#include <Stepper.h>

const int stepsPerRevolution = 200; // change this to fit the number of steps per revolution
// for your motor

// initialize the stepper library on pins 8 through 11:
Stepper myStepper(stepsPerRevolution, 2,3,4,5);

void setup() {
// set the speed at 60 rpm:
myStepper.setSpeed(60);
// initialize the serial port:
Serial.begin(9600);
}

void loop() {
// step one revolution in one direction:
Serial.println("clockwise");
myStepper.step(stepsPerRevolution);
delay(500);

// step one revolution in the other direction:
Serial.println("counterclockwise");
myStepper.step(-stepsPerRevolution);
delay(500);
}