CardInfo on ENC28J60 ethernet shield

Hi!referring from the datasheet of ENC28J60 ethernet module, it has an SD card slot that I wanted to use but the example code EXAMPLES>SD>CARDINFO it just would not work. I did changed the chipSelect from 10 to 9, and 5 according to the datasheet its the CS. I am using a Gizduino Atmega644.

// change this to match your SD shield or module;
// Arduino Ethernet shield: pin 4
// Adafruit SD shields and modules: pin 10
// Sparkfun SD shield: pin 8
const int chipSelect = 5;

i have already inserted a mini SD card in it.

Thank you in advance!

link for the datasheet enc28jc ethernet shield datasheet

referring from the datasheet of ENC28J60 ethernet module, it has an SD card slot

Which module?

I did changed the chipSelect from 10 to 9, and 5 according to the datasheet its the CS.

Which data sheet? Which pin is the chip select pin? 9 or 5?

I am using a Gizduino Atmega644.

So, not an Arduino…

Which module?

The ENC28J60 Ethernet Module.

Which data sheet? Which pin is the chip select pin? 9 or 5?

The datasheet that I attached as a link.I changed it to 9 and a 5 and even 10 and 4. Also did the adding of

pinMode(4, OUTPUT);     // change this to 53 on a mega
digitalWrite(4,HIGH);

And, stumbled upon this. Trying it now.

So, not an Arduino...

It is an Arduino Clone. The Ethernet capability is working,hooked it up on a router, It can remotely on/off leds,etc.

Thank you for replying!

The ENC28J60 Ethernet Module.

That is non-responsive. If you can be bothered posting a link to the actual shield you are trying to use, I can't be bothered to read any further.

The datasheet that I attached as a link

The site that the datasheet is on is block by my company's IT organization.

It is an Arduino Clone.

Which Arduino was cloned? No real Arduino uses a 644 chip.

Seeing all of your code, and knowing what, exactly, your problem is would be useful. "It didn't work" doesn't tell us anything.