Hi All - I am very very new to Arduino and trying my first project that is an espresso grinder timer. I honestly do not know alot about programming either. I bought an LED screen that is different than the one the original project designer used and have been struggling to figure out how to adjust the code to work with this different component.
The project used a Digole Serial OLED and I bought an Adafruit SSD1306 OLED. Both OLEDs are 128x64 but definitely connect to different pins and operate very differently. I have tested the OLED with the Adafruit 128x64 i2c example and when I make the 0x3c code change it works great. I have tried messing with the sketch code but cannot seem to get anything to work. Any help would be amazing.