Changing the Si4432 Preamble to Communicate with RFM43B

Hello guys, I need kind of help for my project to connect SI4432 transceiver and HopeRF 43. The format payload from both RF module is slightly different but the register and rule seems to be familiar. Only the Preamble is different, the SI4432 use 010101 and RF43 use 101010.

I need some help to configure the preamble of SI4432, because I use it for the receiver and easy to modify, and the RF is embed in weather station and I can't customize much of it.

Or maybe anyone knows the way to ignore the preamble and just get the raw data, like Realtek chip that was used on SDR Dongle ?

I don't know the answer - my experience is the nRF24L01+ wireless.

It would be a good idea to add "SI4432 transceiver and HopeRF 43" to your Title to catch the attention of people who could help. You can change the Title by modifying your Original Post.

...R

What does the SI4432 datasheet say about configuring the preamble ?

srnet:
What does the SI4432 datasheet say about configuring the preamble ?

Hmm, the datasheet said nothing and only have the information regarding how much the length of the desired preamble i need in nimble. 1 nible is 4 bit hex.