code here (made using blocks in tinker cad): // C++ code // #include <Servo.h> Servo servo_9; Servo servo_10; Servo servo_8; void setup() { pinMode(5, INPUT); servo_9.attach(9, 500, 2500); pinMode(3, INPUT); servo_10.attach(10, 500, 2500); pinMode(4, INPUT); servo_8.attach(8, 500, 2500…

Circuit and code works in simulation but not doing anything when done it real life

Other Hardware Motors, Mechanics, Power and CNC

slipstick November 5, 2021, 8:33am 4

Please don't try to run servo power through a breadboard. They are only intended for low current. Servos and other motors are NOT low current devices.

Steve

Topic		Replies	Views
[SOLVED]: Servo problem (power supply?) Motors, Mechanics, Power and CNC	10	11497	May 6, 2021
Servo not working with breadboard power supply Motors, Mechanics, Power and CNC	6	2897	May 6, 2021
Servo and power supply question - turns in one direction Motors, Mechanics, Power and CNC	7	2716	May 6, 2021
[solved] Servos not working/responding, Programming	12	3885	May 5, 2021
Arduino + Servo Help Motors, Mechanics, Power and CNC	17	4488	May 6, 2021

Circuit and code works in simulation but not doing anything when done it real life

Related topics