Civic Type R LED project

Other Hardware LEDs and Multiplexing
1

I have a 2018 Civic Type R and looking to replace the incandescent bulbs with LEDs. I've been lurking on these forums reading up and am interested in the Philips Xtreme Ultinon Gen 2 LEDs since they're brighter than stock and designed to provide light in the same spot as the old school bulbs for reflector type housings. From the factory it has LED headlights, front signaIs, foglights, and taillights, the rest is incandescent. I have been reading about "hyperflash" and would like to know my options for a plug and play solution for a resistor or if it would even apply since half the car is LED??? The rear light housings mount against the body so the resistor will have to be sandwiched between said housing and body making me concerned about heat.

Bulbs I'll need:

Side Marker - T10/194 x2
Reverse - T10/194 x2
Brake - 7440 x2
Rear Turn Signal - 7440A x2
Ideally I'd like to go resistor free if possible with a high-quality, non-Chinese bulbs or bulbs that are simply a shroud with LEDs tacked on.

Any advice and/or help is appreciated.

Thanks in advance.

2

Although it's possible indeed likely that someone here will have some thoughts, I'm very curious to know why that question is under "Using Arduino" :wink: