[Closed] DUE with Blue Serial IIC/I2C/TWI 2004 204 20X4 Character LCD

Hi all

I have bought this display (http://www.ebay.ca/itm/Blue-Serial-IIC-I2C-TWI-2004-204-20X4-Character-LCD-Display-Module-For-Arduino-/191226723781?) for my Arduino due.
I use the latest IDE (1.6.7) with latest library from F Malpartida and some help from website http://arduino-info.wikispaces.com/LCD-Blue-I2C.

Unfortunately I can’t find a way for make this LCD working 'after reading many post on many different websites) . I always have compile errors. (with trying different libraries and sketches)
Is there anybody that find a way to program successfully this LCD and could help me?

The arduino (DUE) recognize the LCD at address 0x27. I found just one library called “LiquidCrystal_I2C2004V1_Chinese” where the LCD display on each line just the first character of the string.

I included some photos of my lcd and the chip that is on the I2C is a PC8574T

Gilles

IMG_0127.JPG

Hi, I'm having the same problem...Any solution ? :slight_smile:

The thread is marked [Closed] so I didn't even look at it.

Don

Hi all

I have bought this display (http://www.ebay.ca/itm/Blue-Serial-IIC-I2C-TWI-2004-204-20X4-Character-LCD-Display-Module-For-Arduino-/191226723781?) for my Arduino due.
I use the latest IDE (1.6.7) with latest library from F Malpartida and some help from website http://arduino-info.wikispaces.com/LCD-Blue-I2C.

Unfortunately I can't find a way for make this LCD working 'after reading many post on many different websites) . I always have compile errors. (with trying different libraries and sketches)
Is there anybody that find a way to program successfully this LCD and could help me?

The arduino (DUE) recognize the LCD at address 0x27. I found just one library called "LiquidCrystal_I2C2004V1_Chinese" where the LCD display on each line just the first character of the string.

I included some photos of my lcd and the chip that is on the I2C is a PC8574T

mpcz, 08.may.2017

What part of [Closed] are you having trouble understanding?

In other words ... start a new thread.

Don