Code not uploading to arduino nano with usb c port

Official Hardware Nano Family Classic Nano
1

Hey there, so im trying to upload some simple code to my arduino nano (offbrand) but every time i try i get this error:

avrdude: Version 6.3-20190619
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "/Users/
         User configuration file is "/Users/.../.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/cu.usbserial-10
         Using Programmer              : arduino
         Overriding Baud Rate          : 115200
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00

avrdude done. Thank you.

Failed uploading: uploading error: exit status 1

its connected to the right port and i have installed the ch340 driver i dont know why it doesnt work anymore tbh.

2

Two points

Make sure that /dev/cu.usbserial-10 is indeed your Nano; does the port disappear when you disconnect the board?

You seem to be using the 328P option in the tools / processors menu; try the "old bootloader" option.

3

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.