??? Comment utiliser 2 ADS1115 avec arduino ??? (Résolu)

International Français
3

Voila ce à quoi j'ai abouti reste plus qu'à finir, en espérant que cela pourrait aider...
Merci encore :wink:

#include <Wire.h>
#include <Adafruit_ADS1015.h>

Adafruit_ADS1115 ads1(0x48); // ads 1
Adafruit_ADS1115 ads2(0x49); // ads 2




void setup(void){ 
  //Serial.begin(115200); 

  ads1.begin();
  ads2.begin();
  ads1.setGain(GAIN_EIGHT);      // 8x gain   +/- 0.512V  1 bit = 0.25mV   0.015625mV
  ads2.setGain(GAIN_EIGHT);      // 8x gain   +/- 0.512V  1 bit = 0.25mV   0.015625mV
  

 
  
}

void loop(void)
{
  int16_t data1, data2, data3, data4;
 
  
  float multiplier = 0.015625; 
  
  data1 = ads1.readADC_Differential_0_1(); // Differential read from ads 1 pin A0/A1
  data2 = ads1.readADC_Differential_2_3(); // Differential read from ads 1 pin A2/A3
  data3 = ads2.readADC_Differential_0_1(); // Differential read from ads 2 pin A0/A1
  data4 = ads2.readADC_Differential_2_3(); // Differential read from ads 2 pin A2/A3
    


  delay(10);


}