Communication problem with XbeePro S2B+Foca v2.2 and Arduino Mega ADK

Hi!

I have a problem to comminicate 2 xbee's pro s2b with foca v2.2 adpter.

One xbee is connected to foca and plugget in to usb port (router) and another one is connected to foca adapter too (coordinator) and connected to arduino via bread board and cabels.

I'm trying to send a message from router to coordinator and want to see that message on arduino via serial monitor. I see that TX diod on router has blinking when is send a message, but diod RX on coordinator hasn't. So I can't see the message on arduino via serial monitor. What trouble is this?

Foca Arduino VCCIO 3.3V TXD RX0 RXD TX0 GND GND

Foca: http://imall.iteadstudio.com/im120525005.html (see datasheet in Download tab)

Xbee: http://www.digi.com/products/wireless-wired-embedded-solutions/zigbee-rf-modules/zigbee-mesh-module/xbee-zb-module

Arduino: http://arduino.cc/en/Main/ArduinoBoardMegaADK?from=Main.ArduinoBoardADK

P.S.: sorry for my english

You Foca link is screwed up.

How have you configured the XBees?

Sorry. Already corected

All in default settings, just ID = 1111 in Router AT and Coordinator AT

In X-CTU terminal I can communicate and both LED's are blinking. Trouble happens when I connect one xbee to arduino

All in default settings, just ID = 1111 in Router AT and Coordinator AT

So, each XBee has a name, and knows what other XBee(s) it can talk to. If you want to keep that information a secret, I'm OK with that. Good luck.