Connect servo motor + RTC + water pump + arduino uno

Other Hardware Motors, Mechanics, Power and CNC
1

Hello!!

I`m developing a small project that will turn on every morning, run a servo motor to the right, run a water pump, run the same servo motor to the left and finally "turn off" until next day.

Im trying to connect the servo motor to a motor shield, but if I use motor shield I dont have space to connect the RTC. So the idea is not use motor shield and this way I can connect everything to arduino uno pins.

The servo motor is a Futaba S3003 Standard Servo (6V) and the water pump is RioRand DC30A-1230 12V. I know that I need an external power supply, but I don`t now how to connect with arduino.

Any idea will be welcomed.

Thanks!!

2

Perhaps a screw shield so you can access pins that other shields are not using, but are blocking physical access to?
http://wwww.crossroadsfencing.com/BobuinoRev17/

1073×826 141 KB

3

Thank you for your attention!!

I have this motor shield.

http://www.amazon.com/Zitrades-L293D-Shield-Arduino-Duemilanove/dp/B00CHHZU36/ref=sr_1_1?ie=UTF8&qid=1433833434&sr=8-1&keywords=motor+shield+arduino)

As you can see all pins are soldered and I can`t connect my RTC.