Connect the SCL3300 inclinometer to the ESP8266

Hello guys,

I was looking for a very sensitive inclinometer and first found the SEN0386 from DFROBOT (Serial 6-Axis Accelerometer/Gyroscope Module for Arduino Wiki - DFRobot). Then I heard about the ADIS16203 (ADIS16203 Datasheet and Product Info | Analog Devices) which looks fine.

But the one I'm interested now is the SCL3300 (https://www.murata.com/en-eu/products/sensor/inclinometer/overview/lineup/scl3300 ). I found it can be sold on a PCB (https://www.murata.com/en-eu/products/sensor/design-development/scl3300-d01-pcb ).
My problem is I need to connect it to an ESP8266 but I'm not sure at all how connect it. Could you please help me on this?
What do you think of my choices? Would you go with something else?

Thanks a lot in advance for your help.
Laurent

Hi @ponpon777,

Based on this document:
https://www.murata.com/-/media/webrenewal/products/sensor/pdf/specification/pcbspec_scx3300.ashx?la=en&cvid=20190614072539001900

This module will communicate with the ESP8266 using the BUS SPI.

RV - mineirin

ok thanks. I will go in that direction.
Laurent