When connecting multiple ATmega's on the same voltage rail would it be advisable to be using resistors to make sure the current is split evenly across the 2 ATmega's. Thanks

Connecting multiple ATmega328p's on same power rail

groundFungus April 30, 2018, 11:25am 2

No. Each 328 will pull the current that it needs.

Topic		Replies	Views
3 atmegas, one wall wort General Electronics	4	1173	May 6, 2021
Chip ATMega 328 de Arduino: Dos patillas de Vcc Español	3	1587	May 6, 2021
Using one MCU to provide power to another General Guidance	3	747	May 5, 2021
Allowed current thru AVR devices 3rd Party Boards	7	3001	May 6, 2021
Atmega328P power (voltage) question IDE 1.x	4	3836	May 5, 2021