Hello, I'm trying to control a continuous winch servo using Arduino NANO clone and I'm encountering some problems where the servo does not seem to be able to hold the final position and starts twitching and oscillating around the final position quite substantially. My setup: Servo, JX SW6114T ( http…

The upper bound on the output current of the power supply is 2.5A and according to the servo datasheet, the maximum consumed current is 2.2A, however the current flowing to the servo does not exceed 1.5A, according to the laboratory source display. However, the problem was not in the servos after a…

Continuous Winch Servo Programmer using Arduino

Other Hardware Motors, Mechanics, Power and CNC

domiinio October 7, 2021, 7:15am 3

I am using an external power source (laboratory power supply) with the voltage set to 5V.

Topic		Replies	Views
Servo won't stop turning... Interfacing	23	13061	May 6, 2021
USB disconnects when continuous servo slows down or changes direction Motors, Mechanics, Power and CNC	6	4362	May 6, 2021
Arduino + Servo Help Motors, Mechanics, Power and CNC	17	4488	May 6, 2021
6 or 8 servo motors arduino Interfacing	20	15100	May 6, 2021
Multiple Servo? Interfacing	44	20360	May 6, 2021

Continuous Winch Servo Programmer using Arduino

Related topics