Good Morning
I am using those exact buttons.
I have implemented your changes and strip one is now working perfectly. How ever button 2 does nothing, I tried changing the button and I ran some code and the button works and so does the strip but with your sketch it does not. the reset button works perfectly as well.
I am using 10k ohm resistors on the button grounds, i tried it with out the resistor and the results were the same.
I also tried changing button 2 to pin 11 on the arduino but still no effect so I put it back on pin 6
Bonjour
I have changed the color of strip 2 after much code review and it now works:) dont know why red wouldn't work but green does however it lights up more like yellow. The color red wont work on the other strip either, kind of strange. but hey we have achieved success, Thank you for helping me out on this one, Merci !
there is a error message with the color red in place.
warning: overflow in implicit constant conversion [-Woverflow]
int ledColor2 = CRGB::Red; // Color for strip 2