howdy all
i have a "deauther"type board i got from wish ... seems to work great for a few projects, but i had to format my computer and cant seem to get the oled working again
the sketch_nov24a dketch is a wemos i2c scanner and is able to identify the oled (had to reverse constants for i2c pins from original code)
the ssd1306simpledemo code also works and displays correctly, telling me the display is fine and useable
(this is an esp8266 oled library example)
my problem comes when trying to use the adafruit library(want to use a menu system that uses the adafruit library for another project)
the 128x64 i2c example in particular
i was under the impression i can add Wire.begin(sdaPin, sclPin); to reassign the i2c pins to get it to work..
(something similar i am sure i used previously to get it working with the adafruit library)
and i have tried all combinations of (d1, d2) (1, 2) (4, 5)
and that is the ssd1306_128x64_12c file i have attached
any help would be much apreciated.
SSD1306SimpleDemo.ino (5.57 KB)
ssd1306_128x64_i2c.ino (9.55 KB)