Hi everyone, I'm testing a W5500 Ethernet module with my ESP32 board using SPI. I'm able to successfully communicate with the chip — I can read the version register (0x04) and the PHY configuration register (0xBA). So SPI and reset seem to be working fine. However, the W5500 reports Link: DOWN, ev…

finally i find the culprits damping resistors(33R) in RXN/RXP and TXN/TXP. No need of these resistors. [w5500]

Custom W5500 with ESP32 S3 ,SPI Working but "Link: DOWN" – No Ethernet Connection Detected

araviiot June 25, 2025, 4:41am 4

Topic		Replies	Views
Custom w5500 and esp board shows no Phy link Hardware Development	19	513	July 24, 2025
Ethernet Shield W5500 not starting Programming	5	2099	May 5, 2021
How to debug W5100 Networking, Protocols, and Devices	15	5247	May 6, 2021
Ethernet module W5500 from eBay, autonegotiation fails Networking, Protocols, and Devices	3	1713	May 6, 2021
Ethernet module W5500 from AliExpress - how to use? Networking, Protocols, and Devices	20	44716	May 6, 2021