# Debug GIGA using IDE2 Debugger?

**URL:** <https://forum.arduino.cc/t/debug-giga-using-ide2-debugger/1193013>\
**Category:** GIGA R1 WiFi\
**Created:** [November 24, 2023, 1:54pm UTC](https://forum.arduino.cc/t/debug-giga-using-ide2-debugger/1193013 "2023-11-24T13:54:11Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![KurtE](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/kurte/32/1246572_2.png) [@KurtE](https://forum.arduino.cc/u/KurtE)\
**Post date:** [December 2, 2023, 2:46pm UTC](https://forum.arduino.cc/t/debug-giga-using-ide2-debugger/1193013/3 "2023-12-02T14:46:07Z")

</div>

Found at least a partial solution, which I posted in the thread:

> [@Arduino IDE 2.2.1 debug failure](https://forum.arduino.cc/t/arduino-ide-2-2-1-debug-failure/1195757/7):
>
> @wwatson @Merlin513 @ptillisch: Some success smiley I downloaded the latest version of the JLINK software: I created the debug\_custom.json file: { "servertype": "jlink", "device": "STM32H747XI\_M7", "interface": "SWD", "serverpath": "D:/Program Files/SEGGER/JLink\_V794/JLinkGDBServerCL" } Note: Update the above to where you installed the JLINK code. .. Edit: wondering if other debugger modules will work as well, like the STLink/V2 Or the Tinde cmis-dap (likewise Pico)?

As I mentioned in that thread, it would be nice to know if other hardware debuggers can be used and if so what is needed to do so.

---

_[View the full topic](https://forum.arduino.cc/t/debug-giga-using-ide2-debugger/1193013)._
