DFROBOT BME_280 sensor with FireBeetle ESP8266 IOT - Help

Hello All…

I am very new at arduino projects trying to ease my way into C++ programming language. I felt that I needed to start off small and am failing miserably! I felt a nice Google search and some youtube videos and I would be on my feet and running.

I am trying to setup a very basic BME_280 sensor with a FireBeetle ESP8266 wired as I2C. After loading the DFRobot_BME_280-master example I2C sketch I get this return:


Sketch

/*!
 * @file basicTestI2C.ino
 * @brief DFRobot's Temperature、Pressure、Humidity and Approx altitude
 * @n [Get the module here]
 * @n This example read the Temperature、Pressure、Humidity and Altitude from BME280, and then print them
 * @n [Connection and Diagram]
 *
 * @copyright	[DFRobot](http://www.dfrobot.com), 2016
 * @copyright	GNU Lesser General Public License
 *
 * @author [yangyang]
 * @version  V1.0
 * @date  2017-7-5
 */

#include <DFRobot_BME280.h>

#define SEA_LEVEL_PRESSURE	1013.25f
#define BME_CS 10

DFRobot_BME280 bme; //I2C

float temp, pa, hum, alt;

void setup() {
    Serial.begin(115200);
    
    // I2c default address is 0x76, if the need to change please modify bme.begin(Addr)
    if (!bme.begin(0x77)) {
        Serial.println("No sensor device found, check line or address!");
        while (1);
    }
    
    Serial.println("-- BME280 DEMO --");
}


void loop() { 
	temp = bme.temperatureValue();
	pa = bme.pressureValue();
	hum = bme.humidityValue();
	alt = bme.altitudeValue(SEA_LEVEL_PRESSURE);
	
	Serial.print("Temp:");
	Serial.print(temp);
	Serial.println(" C");
	
	Serial.print("Pa:");
	Serial.print(pa);
	Serial.println(" Pa");
	
	Serial.print("Hum:");
	Serial.print(hum);
	Serial.println(" %");
	
	Serial.print("Alt:");
	Serial.print(alt);
	Serial.println(" m");
	
	Serial.println("------END------");
	
	delay(1000);
}

Return

Soft WDT reset

ctx: cont 
sp: 3ffef3e0 end: 3ffef5c0 offset: 01b0

>>>stack>>>
3ffef590:  3fffdad0 00000000 3ffee568 402020b1  
3ffef5a0:  feefeffe feefeffe 3ffee584 40203848  
3ffef5b0:  feefeffe feefeffe 3ffee5a0 40100718  
<<<stack<<<

 ets Jan  8 2013,rst cause:2, boot mode:(3,6)

load 0x4010f000, len 1384, room 16 
tail 8
chksum 0x2d
csum 0x2d
v6000001c
~ld
⸮No sensor device found, check line or address!

So I verified the sensor with a I2C scanner and verified a return on 0x77. I tried to modify the address in the sketch with no help and same return. I also tried to modify the address in the .h library file with no help.

Scan

I2C scanner. Scanning ...
Found address: 119 (0x77)
Done.
Found 1 device(s).

https://playground.arduino.cc/Main/I2cScanner
Any ideas?

SKU:SEN0236 SKU:DFR0489 IDE Arduino 1.8.7
BME280 library GitHub - DFRobot/DFRobot_BME280