I accidentally shorted the 5v pin and gnd pin on my Arduino nano while powering it with 12v external pwr supply. The board made a pop sound and the voltage regulator outputs 9v at the 5v pin. Atmega heats up when powered with 12v external. While trying to upload, the RX led lights up faintly but no …

Get a new one. You don't know which damage is done except for the voltage regulator. So fix that and you probably will find out that the 328P and the TTL-to-USB did not survive the 9V.

Did I Fry my Arduino nano?

Development Tools IDE 1.x

bheeduino September 26, 2021, 7:00am 3

I had some 7805's laying around. I replaced the regulator with one of them. And you're right I fried it. Thx

Topic		Replies	Views
How can i fix a blown Arduino Nano? General Electronics	8	2200	May 6, 2021
Fried voltage regulator - Arduino Nano V3 IDE 1.x	3	2060	May 5, 2021
Could my Arduino have been damaged IDE 1.x	9	1976	May 5, 2021
23 volt on arduino, now not working it is fried? IDE 1.x	5	1421	May 5, 2021
Arduino Nano with a fried voltage regulator General Electronics	4	3049	May 6, 2021

Did I Fry my Arduino nano?

Related topics